Belimo搏力謀電動球閥蝶閥:

Belimo搏力謀已成為暖通空調領域的者，產品包括belimo風門執行器、風閥執行器、belimo電動蝶閥、belimo電動調節閥、belimo電動球閥、belimo電動兩通閥。
belimo搏力謀控制球閥的技術：特殊的流量配置裝置—配流盤
搏力謀belimo解決球閥的控制穩定性問題。搏力謀控制球閥在的特殊裝置---配流盤。配流盤是一側為凹型的球面，與球型閥芯表面良好配合。流量通過球型閥芯的配流盤V型開口之間的開度得到精密控制。因而將球閥C值減小到相同規格座閥的C值。配流盤確定了閥門的特性。備有不同形狀開口的配流盤，因而每種規格的閥門可以有不同的C值。
作為一家始創于1975年6月1日的瑞士公司，Belimo已經從一家小型公司成長為現在的上市公司,不僅在世界各地設立了分公司及辦公網點，并成為了暖通空調領域的者。在過去的30年里，Belimo的品牌，產品得到了眾多客戶及終端用戶的一致認可；Belimo象征著的產品，快速的供貨和永無止境的創新。為了繼續加大Belimo的成功步伐，Belimo亞太將全力以赴的為廣大客戶提供應用在加熱，通風及空調等領域的*品質的風門和控制閥。

Belimo搏力謀電動球閥蝶閥技術參數：

Open/close ball valve, 2-way, Internal thread
• For open and closed cold and warm water systems
• For shut-off functions on the water side and 2-point
controls in air handling units and heating systems
• Air bubble tight
Type kvs
[ m³/h]
DN
[ ]
Rp
[”]
PN
[ ]
R2015-S1 15 15 1/2 40
R2020-S1 15 20 3/4 40
R2020-S2 32 20 3/4 40
R2025-S2 26 25 1 40
R2032-S2 32 32 1 1/4 25
R2040-S2 31 40 1 1/2 25
R2050-S3 49 50 2 25
Functional data Media Cold and warm water, water with glycol up to
max. 50% vol.
Medium temperature -10...120°C
Medium temperature note The allowed media temperature can be limited,
depending on the type of actuator. Limitations
can be found in the respective data sheets of
the actuators.
Closing pressure ?ps 1400 kPa
Differential pressure ?pmax 1000 kPa
Differential pressure note 200 kPa for low-noise operation
Leakage rate Leakage rate A, air-bubble-tight (EN 12266-1)
Pipe connectors Internal thread according to ISO 7-1
Angle of rotation 90°
Installation position Upright to horizontal (in relation to the stem)
Maintenance Maintenance-free
Materials Housing Brass body nickel-plated
Closing element Stainless steel
Stem Stainless steel
Stem seal O-ring EPDM
Valve seat PTFE, O-ring EPDM
!
• The valve has been designed for use in stationary heating, ventilation and air-conditioning
systems and is not allowed to be used outside the specified field of application, especially
in aircraft or in any other airborne means of transport.
• Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
• The valve does not contain any parts that can be replaced or repaired by the user.
• The valve may not be disposed of as household refuse. All locally valid regulations and
requirements must be observed.
• When determining the flow rate characteristic of controlled devices, the recognised
directives must be observed.
R2..-S..
T